Cooper (R50) L4-1.6L (W10) (2002)
Remove guide screws (2) and release brake caliper. Do not allow brake caliper to hang from brake hose, risk of damage to brake hose.
Install Hint:
Only clean guide screws, do not grease.
Check threads.
Replace all guide screws which are not in perfect condition.
Tightening torque:
-
Guide bolt Wrench size 7mm .............................................................................................................................................................. 25 - 30 Nm
Remove brake linings
Using special tools 34 6 301 /34 6 306 /34 6 307 / 34 6 308 as shown, press brake piston into caliper.
Install Hint:
Ensure inside brake lining is correctly located in piston groove (1).
(Dust sleeve removed only for purpose of showing a clear graphic).