Cooper (R50) L4-1.6L (W10) (2002)
1. - Tighten down all bolts in crankcase to jointing torque.
2. - Tighten down all bolts in crankcase with special tool 00 9 120 to torsion angle.
Installation Note:
Tightening torque 11 11 2AZ.
Remove crankcase.
Read off main bearing clearance with measuring scale.
Main bearing play.
-
Remove plastic thread.
-
Lubricate bearing shells and bearing shells.
Installation Note:
Always replace main bearing bolts.
Do not wash off bolt coating.
There must be no oil in the blind holes (risk of cracking).