Cooper (R50) L4-1.6L (W10) (2002)
1 - Oil filter element MINI ONE and MINI COOPER (W10) up to now.
2. - Replacement oil filter for all MINI ONE and COOPER (W10) and MINI COOPER S (W11) engines
Installation Note:
The new oil filter element (2) must be fitted in the (W10) engines with a higher amount of force.
The inside diameter is somewhat narrower and slightly higher so that increased pressure is needed to refit the oil filter cap.
Note:
MINI ONE and COOPER (W10).
1 - Filter housing cap
2. - Spring
3. - Plastic guide sleeve
4. - Oil filter element
Important!
Guide sleeve and spring must not be removed.
Failure to comply with this instruction will result in low engine oil pressure (engine damage).