Cooper (R50) L4-1.6L (W10) (2002)
Tighten down central bolt (1).
Tightening torque: 102 Nm.
Move timing chain tensioner into transition position.
Place clamping fixture (1) on a level surface.
Remove cap (2) from clamping fixture.
Place palm of hand against clamping fixture and exert continuous pressure until clamping fixture is completely compressed.
Replace cap (2) on clamping fixture.
Install timing chain tensioner.
Tighten down screw plug (2).
Installation note:
Tightening torque: 63 Nm.
Install cable holder (1).