Cooper (R50) L4-1.6L (W10) (2002)
/l4-1.6l_(w10)/Page-641001.png)
Front Crankshaft Seal: Service and Repair
Replacing Radial Seal Below Timing Case Cover
Special Tools Required:
^
11 8 241
^
11 8 242
^
11 8 243
^
11 8 270
^
11 8 290
Remove vibration damper.
Fit special tool 11 8 270 into crankshaft.
Fit special tool 11 8 290 on crankshaft and screw in until it is rigidly connected with the radial sealing ring (1).
Remove radial seal (1) by tightening bolt.
Remove special tool 11 8 270 and replace with special tool 11 8 242 and tighten.
Coat sealing lip of new radial seal with oil.
