Cooper (R50) L4-1.6L (W10) (2002)
/l4-1.6l_(w10)/Page-646002.png)
Remove chain guide retaining bolts (1) and remove both guides (2).
Replace timing chain, camshaft gear and both guides.
Remove crankshaft gear.
Use special tool 11 8 300 in conjunction with 11 2 000.
Replace crankshaft gear.
Install hint: Shrink fit gear (1) to crankshaft.
Check locating pin (2) for correct position.
Heat gear to maximum 150°C with hot air blower or hotplate.
Caution: Do not exceed specified temperature!
Install hint:
Install timing chain guides.
Install guide retaining bolts.
Guide and tensioning rail to cylinder head
M8 ..................................................................................................................................................................................................................... 28 Nm
