Cooper (R50) L4-1.6L (W10) (2002)
/l4-1.6l_(w10)/Page-1924001.png)
Evaporator Case: Service and Repair
Removing And Installing/Replacing Evaporator
Remove heater.
Remove evaporator temperature sensor.
Disconnect connector (1).
Remove wiring harness (2) from air intake duct.
IHKA only:
Remove temperature control servo.
Remove screws (1).
Release clip (2).
Remove air intake duct (3).
Disconnect resistor/transistor pack connector (1).
Release heater harness connector (2) from heater casing.
