mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

Body - Sunroof Squeaks During Operation|Page 11934 > < Body - Sunroof Cassette Tool/Service Procedure|Page 11929
Page 1
background image

Sunroof / Moonroof Track: All Technical Service Bulletins
Body - Sunroof Squeaks During Operation

SI M 54 01 04
Special Roofs

January 2004 
Service Engineering

SUBJECT
Squeaking Noise When Operating Sunroof

MODEL
Cooper, Cooper S

SITUATION
Some customers may complain of a squeaking noise when sliding the sunroof open and closing.

CAUSE
This noise can be caused by dirt or a lack of lubrication in the outer guide rails for the linkage that lifts the rear of the sunroof.

PROCEDURE
In case of customer complaint, the guide rails should be cleaned and lubricated. This is best done by attaching a small cloth swab to the end of a stiff
wire rod, such as a straightened out coat hanger or a piece of welding rod.

Open the sunroof and clean the guide rails by inserting the rod and cleaning swab (1) from the front and thoroughly wiping out the inside of the rails.

This illustration points out the areas (1) that must be cleaned and lubricated in each rail.

Use a clean swab soaked in lubricant oil, part number 83 19 0 142 692, to lubricate the full length of the rails Operate the sunroof several times to ensure
even distribution of the lubricant.

Body - Sunroof Squeaks During Operation|Page 11934 > < Body - Sunroof Cassette Tool/Service Procedure|Page 11929