Cooper (R50) L4-1.6L (W10) (2002)
Brake Bleeding: Service and Repair
Brake System With ABS/ASC+T
Brake System With ABS/ASC+T
Note: Refer to General data, refer to Antilock Brakes / Traction Control Systems, Description and Operation. See: Brakes and Traction
Control/Antilock Brakes / Traction Control Systems/Description and Operation
Connect bleeding unit to expansion tank and switch on.
Note:
Check relevant operating instructions for each device.
Charging pressure must not exceed 2 bar.
Flush braking system completely:
Connect bleeder hose and bottle to bleed valve on rear right brake caliper.
Open bleed valve and flush until clear, bubble-free brake fluid emerges.
Close bleeder valve.
Follow same procedure on rear left, front right and front left wheel brake.
Bleed rear-axle brake circuit.
To bleed the rear wheel brake, follow the procedure specified in the DIS (Diagnosis Information System).