Cooper (R50) L4-1.6L (W10) (2002)
WARRANTY INFORMATION
Reimbursement for this Service Action will be via Campaign Entry.
Procedure
^
For Chassis Number Ranges "TB30290 - TB30304", "TC30020 - TC30045", "TD50028 - TD50064" and "TE10017 - TB10035" follow Procedure
A
^
For Chassis Number Ranges "TC30047 - TC30125" and "TD50066 - TD50081" follow Procedure B
^
For Chassis Number Ranges "TC30126 - TC30569", "TD50082 - TD50200" and "TE10037" follow Procedure C
Please note that there is a different campaign defect code assigned to each of the above procedures.
Procedure A
Applies to Chassis Number Ranges "TB30290 - TB30304", "TC30020 - TC3004511, "TD50028 - TD50064" and "TE10017 - TE10035" only.
Replace the BC1 and install additional sealing and BC1 protection as follows:
1.
"A" pillar roof finisher clip sealing
^
Remove the right hand side roof finisher in accordance with TIS Repair Instruction 51 13 301.
^
Remove finisher clip (1) from the roof panel and discard the clip.
^
Take the new expanding nut (see Parts Information) and carefully remove the black foam washer from the nut. Discard the nut.
^
Take the new finisher clip (see Parts Information). Remove and discard the rubber washer.
^
Install the foam washer onto the finisher clip and push the clip firmly into the hole in the roof panel. Make sure that both legs of the clip have