mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

Campaign - BC1 Replacement/Harness Repair|Page 5918 > < Lighting - Brake Lights Stay ON By Themselves
Page 1
background image

Technical Service Bulletin # M610402

Date: 030401

Campaign - BC1 Replacement/Harness Repair

SI M61 04 02
General Electrical Systems

April 2003 
Service Engineering

This Service Information bulletins supersedes S.I. M61 04 02 dated December 2002.

PERFORM THE PROCEDURE OUTLINED IN THIS SERVICE INFORMATION ON ALL AFFECTED VEHICLES THE NEXT TIME THEY ARE
IN THE SHOP FOR MAINTENANCE OR REPAIRS AND PRIOR TO RETAIL DELIVERY.

[NEW] designates changes to this revision

SUBJECT
Service Action for BC1 Replacement and Harness Repair

MODEL
R50, R53

SITUATION

In certain circumstances, moisture may collect in the BC1 plug connector and cause a variety of electrical malfunctions.

For example, door window, sun roof or air conditioning may be activated or deactivated without driver input.

Note that after completing this Service Action, the Convenience Open feature using the key in the driver's door lock is no longer available. The feature
remains available using the remote key, but only if selected in Vehicle Memory. The customer must be advised, and given the opportunity to change his
or her Vehicle Memory settings. For available Vehicle Memory settings, refer to SI M09 01 02.

Note

Three different VIN ranges are listed. Each has a specific repair procedure and an unique defect code to identify the campaign.

AFFECTED VEHICLES

This Service Action involves R50 and R53 vehicles which were produced from April 24, 2001 to January 22, 2002.

In order to determine if a specific vehicle is affected by this Service Action, it will be necessary to utilize the "Service Menu" of the DCS (Dealer
Communication System).

The Chassis Number Ranges listed below are only for informational purposes and are not to be considered as the only deciding factor.

LABEL INSTRUCTIONS

This Service Action has been assigned code number 5. After the vehicle has been checked, and corrected if necessary, obtain a label (MD 20-013) and:

a.

emboss your MINI dealer warranty number in the middle of the label (1);

b.

punch out code number 5 printed on the label and,

Campaign - BC1 Replacement/Harness Repair|Page 5918 > < Lighting - Brake Lights Stay ON By Themselves