mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

Campaign - BC1 Replacement/Harness Repair|Page 5976 > < Campaign - BC1 Replacement/Harness Repair|Page 5974
Page 19
background image

Dipped headlamps.

Headlamp flash.

Indicators left and right.

Fog lamps.

Brake lamps.

Interior light (open and close door) and map lights.

Headlamp leveling.

Switch OFF all lights.

^

Wiper system

Front flick wipe.

Rear wiper.

Rear washer.

^

Center switch pack

Lock master switch (lock and unlock).

Door windows - one touch down (left and right).

Door windows - hold switch up to fully close (left and right).

Door windows - drop slightly when doors opened (left and right).

^

Air conditioning and heated rear window (with engine running)

All functions of air conditioning and switch LEDs. Heated rear window (check switch LED only).

^

Locking

Close the doors, hood and tailgate, fully open the RH door window, open the sunroof (if installed), turn off the ignition and lock the vehicle with the key.

With the vehicle unlocked, open the tailgate and check the trunk lamp.

Lock the vehicle with the key and hold the key in the locked position to close the RH window and sunroof (if installed).

Procedure C

Applies to Chassis Number Ranges "TC30126 - TC30569", "TD50082 - TD50200" and "TE10037" only

1.

Installing the new BC1 and hard cover

^

Before removing the BC1, using DISPlus/GT1 in "Coding", select "Vehicle Memory", then select "Print List" to record the customer's current
Vehicle Memory settings

^

[NEW] "Select "Vehicle Memory", then select "Print List" to record the customer's current Vehicle Memory settings

^

[NEW] "Select "ZCS/FA Coding"/"R50/R53 Series"/"Recoding"/"ZKE"/"Replace Control Unit"/"Read data out of faulty unit"

[NEW] Note

In order to avoid unnecessary delays in the return of the car to the customer, it is MOST IMPORTANT that this step to "Read data out of
faulty unit" is carried out.

If it is omitted, then when the replacement part is installed, the key barcode data will have to be entered manually. If the barcodes tags cannot be located,
then the barcodes must be requested overnight from the Technical Hotline with the resulting delay in the return of the vehicle to the customer.

Campaign - BC1 Replacement/Harness Repair|Page 5976 > < Campaign - BC1 Replacement/Harness Repair|Page 5974