Cooper (R50) L4-1.6L (W10) (2002)
Install 4 new M6 bolts. Tightening
torque: 10 Nm.
5.
Rotate the pitot chamber (1) until the flange bolt M6x55 (2), which secures engine pitot tube, can be visible.
6.
Unscrew M6x55 bolt (2).
Note on installation:
Tightening torque: 10 Nm
7.
Rotate the pitot tube (1) 180° anticlockwise and remove it from the pitot chamber (2).
Note on installation:
Make sure to clean pitot chamber from any debris/oil residue prior to installation.
8.
Remove 5 bolts M6x55 (1) securing the oil pump.