Cooper (R50) L4-1.6L (W10) (2002)
/l4-1.6l_(w10)/Page-2068007.png)
Body wiring harness for side airbag (1):
Brown triggering circuit wire A = 150 mm
Yellow triggering circuit wire B = 180 mm
Drivers side body wiring harness for belt tensioner (2):
Yellow/Brown triggering circuit wire C = 210 mm
Yellow/Red triggering circuit wire D =
240 mm
Passenger side body wiring harness for belt tensioner (2):
Blue/Brown triggering circuit wire C = 210 mm
Blue/Red triggering circuit wire D = 240
29.
Strip a length of 4 mm from at the end of each wire.
30.
Slide a shrink tube (1) over each wire.
Connecting the repair wiring harness to the body wiring harness.
31.
Place the seat in the vehicle and tilt back towards the rear seat.
