Cooper (R50) L4-1.6L (W10) (2002)
/l4-1.6l_(w10)/Page-1642001.png)
Starter Solenoid: Service and Repair
Replacing Solenoid Switch
Turn off ignition.
Remove starter motor.
Release nut (1).
Remove cable lug (2).
CAUTION!
Do not turn cable lug (2) while tightening down-risk of short circuit to starter motor housing.
Tightening torque, 85 Nm.
Release screws (1).
Remove solenoid switch (1) and spring (2).
Unhook pin (3).
Installation:
Check pin (3) for wear and apply grease.
