Cooper (R50) L4-1.6L (W10) (2002)
/l4-1.6l_(w10)/Page-1818001.png)
Ball Joint: Service and Repair
Replacing Wheel Guide Joint In Control Arm Ball Joint To Frame (Left Or Right)
Special Tools Required:
^
32 1 190
Remove front road wheel.
Left hand control arm only (Xenon lights).
Remove retaining bracket (1) of angle joint from control arm.
Install hint:
Ensure bracket is refitted in correct orientation.
Remove nut.
Press control arm of steering knuckle with special tool 321 190.
Renew self-locking nut.
Outer ball joints to lower arm
M12 x 1.5 Nut ................................................................................................................................................................................................... 56 Nm
Note: Use only once.
Remove bolts (1) securing ball joint.
Remove ball joint.
