Cooper (R50) L4-1.6L (W10) (2002)
/l4-1.6l_(w10)/Page-1397005.png)
If the noise is coming from the lower edge of the panel, trim an burrs or sharp edges off the panel with a knife,
If the noise is coming from the mounting of the inner trim to the trim panel, check the tightness of the heat welded studs (3). If they are loose, they may
be secured by using a soldering gun.
RATTLE FROM REAR HATCH
Refer to Service Information M51 05 02.
WARRANTY INFORMATION
Information only.
