Cooper (R50) L4-1.6L (W10) (2002)
17.
Clean primary bearing bore and shaft.
18.
Clean sealant residue from threads in oil pump drive shaft and clean oil pump housing.
19.
Drive new main ball bearing into position using "Bearing driver" P/N 83 30 0 494 916.94 916.
20.
Reinstall oil pump.
21.
Replace o-ring (1) for the main cover.
22.
Reinstall all previously removed components.
23.
Top-up transmission fluid with ESSO EZL 799.
PARTS INFORMATION
The parts MUST be replaced during the CVT main ball bearing replacement repair: