mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

Recall - Shift Cable Retaining Clip Installation|Page 9572 > < Body - Squeaks and Rattles|Page 9567
Page 1
background image

Shift Cable: All Technical Service Bulletins
Recall - Shift Cable Retaining Clip Installation

SI M25 01 02 
Gear Shift Mechanism

August 2002 
Service Engineering

This Service Information bulletin supersedes S.I. M25 01 02 dated July 2002.

PERFORM THE PROCEDURE OUTLINED IN THIS SERVICE INFORMATION ON ALL AFFECTED VEHICLES BEFORE CUSTOMER
DELIVERY OR THE NEXT TIME THEY ARE IN THE SHOP FOR MAINTENANCE OR REPAIRS.

Under the National Traffic and Motor Vehicle Safety Act of 1966, as amended, if there has been a recall campaign, dealers must assure that all new
vehicles and new items of replacement equipment are free of safety defects and comply with all applicable Federal Motor Vehicle Safety Standards at the
time of delivery to the consumer. This means that dealers may not deliver new motor vehicles or new items of replacement equipment to consumers
unless the safety defect or noncompliance has been remedied before delivery.

[NEW] designates changes to this revision

SUBJECT
[NEW] Recall Campaign No. 02V-201: Shift Cable Retaining Clip

MODEL
R50 Cooper with W10 engine and manual transmission

SITUATION

The potential defect involves the transmission shift cable. The cable connects the gearshift lever in the vehicle interior to the shift linkage on the
transmission. It is possible, in some cases, for the shift cable to detach from the transmission shift linkage while the driver is attempting to change gears.

If the cable detaches from the shift linkage, gear changes will no longer be possible and the transmission will remain in the last gear selected. However,
the engine will continue to run, the vehicle can still be steered and braked with power assist, and all electrical functions, including lighting, are retained.

If shift cable detachment occurs and the transmission remains in any forward gear, the vehicle can still be driven in that gear only. However, if the
transmission moves into neutral and remains there, the vehicle would no longer have the ability to accelerate or maintain speed. Depending on traffic
conditions and the driver's reactions, this could lead to a crash.

BMW is conducting a Recall Campaign to check the shift cable end and install a shift cable retaining clip.

Recall - Shift Cable Retaining Clip Installation|Page 9572 > < Body - Squeaks and Rattles|Page 9567