Cooper (R50) L4-1.6L (W10) (2002)
Transmission Mount: Service and Repair
Replacing Rubber Mount For Transmission Mounting
Replacing Rubber Mount For Transmission Mounting
Special tools required:
^
00 0 201
^
00 0 202
^
00 0 205
^
00 0 207
^
00 0 209
^
11 8 260
Remove battery box.
Remove clutch slave cylinder fixings (1) and remove slave cylinder (2) from gearbox bracket.
Slave cylinder to bracket
M8 ................................................................................................................................................................................................................... 24 Nm
Fit engine support bridge to vehicle.
Use special tools 00 0 201, 00 0 202, 00 0 205, 00 0 207, 00 0 209 and 11 8 260
Tighten support bridge sufficiently to support engine and gearbox weight.
Remove gearbox mount retaining bolt (1) to upper bracket and retaining bolts (2) to gearbox.