Cooper (R50) L4-1.6L (W10) (2002)
Technical Service Bulletin # M610306
Date: 090801
Wipers/Washers - Wiper Insert Replacement Information
SI M61 03 06
General Electrical Systems
August 2009
Warranties
This Service Information bulletin supersedes SI 61 03 06 dated January 2009.
[NEW] designates changes to this revision
SUBJECT
MINI Maintenance Program - Replacement Wiper Inserts
MODEL
All
SITUATION
A new style replacement wiper insert is available for the following the models:
[NEW]R50, R52, R53, R55, R56, R57
All MINI Maintenance Program claims for replacing the wiper blade inserts will require the use of the part numbers listed in this bulletin.
R55 and R56 rear wipers, continue to use the wiper blade inserts or assembly part numbers listed in the EPC until further notice. For the R55, use the
"Set of wiper blades" part number.
Wiper Insert Replacement Interval
The MINI Maintenance Programs allow for the replacement of wiper blade inserts at intervals of 12 months or longer for the models outlined in this
Service Information bulletin. The replacement interval begins on the vehicle's original in-service date.
This policy supersedes all other statements concerning wiper blade maintenance replacement intervals.
[NEW] Wiper Blade and Insert Care
Regularly clean the wiper blade assemblies with soapy water to avoid streaking.
[NEW] Windshield Care
Wax, dirt and road film buildup on the windshield can cause streaking, poor wiper operation and premature wear of the wiper blade inserts. The
windshield should be cleaned regularly to remove contamination. Use MINI approved car care products to clean and care for the vehicle.
The new style wiper insert (2) will have a different locking tab on one end. Old style insert (1).