mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

Removing and Installing/Replacing Front Roofliner Trim|Page 8424 > < Removing and Installing/Replacing Front Roofliner Trim|Page 8422
Page 1
background image

Headliner: Service and Repair
Removing and Installing/Replacing Roofliner (With Slide/Tilt Sunroof)

51 44 011 Removing And Installing/Replacing Roofliner (With Slide/Tilt Sunroof)

Necessary preliminary tasks:

-

Remove trim panel for roof pillar at front (A-pillar) left/right

-

Remove all sun visors and counter-supports

-

Remove roof operating unit

-

Remove interior rear-view mirror

-

Remove rain/light sensor cover

-

Remove front roofliner trim

-

Remove trim panels for door pillars

-

Remove front/rear handles

-

Remove ceiling light

-

Remove rear roofliner trim

-

Remove both backrests

-

Remove trim panel for roof pillar at rear (C-pillar) left/right

-

Remove luggage compartment wheel arch trim on driver's side

-

Remove seal for rear lid

Slide driver's seat (1) fully forward and fold backrest back.
Slide passenger seat (2) fully forward (easy entry).
To prevent roofliner from tilting, tape off rear lid opening at top right and bottom left with yellow plastic adhesive tape (3).

NOTE:  On right-hand drive cars, tape off areas at top left and bottom right.

Detach mucket (1) at top.
Release expansion rivet (2).
Detach roofliner (4) at clip (3).
Lay roofliner (4) downwards.

Removing and Installing/Replacing Front Roofliner Trim|Page 8424 > < Removing and Installing/Replacing Front Roofliner Trim|Page 8422