Cooper (R56) L4-1.6L (N12) (2008)
2.
Check exterior surfaces for contaminants a rough or gritty feel, or use a white terry cloth towel to see if you get small snags of material on the
surface.
3.
Work contaminated areas with a 3M clay bar, using light pressure and car wash soap or 3Mtrade; Gloss Enhancer as a lubricant.
4.
Rinse and dry the surface.
5.
Knead the clay periodically to expose a new surface.
6.
Polish the surface, using BMW approved polishing materials and techniques
Note:
Refer to the BMW Color system manual for approved polishing materials and proper techniques.
* Please see page two for a list of BMW approved materials.
PARTS INFORMATION
The following materials are approved by BMW for the removal of rail dust and for the repair of the paint surface:
^
3M(TM) 200 gram clay bar - PN 38070
^
3M(TM) Finesse-Ittrade; SRC Finishing Material - PN 05927
^
3M(TM) Wool Pad - PN 05703 or 05719
^
3M(TM) Detailing Cloth - PN 06016
^
3M(TM) Black Foam Pad - PN 05725 or 05738
^
3M(TM) Perfect-It 3000trade; Ultrafin SE - PN 06068
^
3M(TM) Yellow Wool Pad - PN 05713
^
3M(TM) Perfect-It trade; Foam Polishing Pad Glaze - PN 05996
^
3M(TM) Black Foam Pad - PN 05729
^
3M(TM) Car Wash Soap - PN 39000
^
3M(TM) Detailing Cloth - PN 06017
^
BMW Car Wash Soap - 83 12 0 412 530
^
BMW Polishing Cloth - 83 12 0 411 891
For product safety and health information, please see the Material Safety Data Sheet (MSDS 08-5407-5), or contact:
3M Automotive Aftermarket Division
3M Center, Bldg. 223-6N-01
St. Paul, MN 55144-1000
Disclaimer