mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

Removing and Installing Rear Roller Sun Blind|Page 8784 > < Removing and Installing Rear Roller Sun Blind|Page 8782
Page 1
background image

Sun Shade: Service and Repair
54 13 120 Removing and Installing Rear Roller Sunblind

54 13 120 Removing And Installing Rear Roller Sunblind

Necessary preliminary work:

-

Remove glass slide/tilt sunroof cover at rear

Release screws (1) on left and right.

NOTE:  The right side is removed in the same way as the left side.

Carefully raise rear glass lid mechanism (2).
Unlock retaining lugs and lift out roller sunblind (1).

Installation note:
Retaining lugs on roller sunblind must not be damaged.

Removing and Installing Rear Roller Sun Blind|Page 8784 > < Removing and Installing Rear Roller Sun Blind|Page 8782