Cooper (R56) L4-1.6L (N12) (2008)
Brake Caliper: Removal and Replacement
34 11 250 Removing and Installing/Replacing Front Left or Right Brake Console/Back Plate
34 11 250 Removing and installing/replacing front left or right brake console/back plate
Necessary preliminary tasks:
^
Remove front brake discs
Release screws (1) and remove brake guard plate.
Installation:
Tighten protective plate to steering knuckle
4AZ Protective plate to steering knuckle
M6 x 10 ............................................................................................................................................................................................................... 8 Nm
34 11 519 Front Brake Caliper
34 11 519 Removing and installing/replacing left or right front brake caliper
Necessary preliminary tasks:
^
Read and comply with General Information.
^
Remove front left or right wheel
Note: After completing tasks, bleed brake system
Press clutch pedal down to floor and secure with pedal support.
Note:
The pedal support may only be released when the brake lines are reconnected.
This prevents brake fluid from emerging from the expansion tank and air from entering the system when the brake lines are opened.
Pull brake hose out of holder (1).
Important:
Grip brake hose at square head (3) to prevent connecting piece from turning in retaining bracket.