Cooper (R56) L4-1.6L (N12) (2008)
Heater Core: Service and Repair
64 11 207 Replacing Heater Core
WARNING: Follow instructions for working on cooling system.
Necessary preliminary tasks:
-
Remove intake filter housing
Unlock and detach coolant lines (1).
Carefully blow through twin pipes to remove remaining coolant from heater core.
Installation:
Make sure coolant lines (1) are correctly seated.
Vent cooling system and check for leaks.
Remove trim for instrument panel at bottom left. Release screws (1) and feed out cover (2) towards bottom.
NOTE: Have cloths or paper towels ready in order, if necessary, to catch escaping coolant.