Cooper (R56) L4-1.6L (N12) (2008)
Water Pump: Service and Repair
11 51 000 Removing and installing/replacing water pump (N12)
Warning:
Danger of scalding!
Only perform these tasks on an engine that has cooled down.
Recycling:
Catch and dispose of drained coolant.
Observe country-specific waste-disposal regulations.
Necessary preliminary tasks:
^
Remove friction gear. See: Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair
Release screws (1).
Installation:
Replace seal.
Clean sealing surfaces.
Assemble engine.
Venting instructions must be observed without fail. See: Service and Repair