Cooper (R56) L4-1.6L (N12) (2008)
/l4-1.6l_(n12)/Page-485001.png)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
11 23 010 Removing and installing or replacing vibration damper (N12)
Necessary preliminary tasks:
^
Remove drive belt.
Release screws (1).
Tighten torsion damper to crankshaft hub.
1AZ Torsion damper to crankshaft hub
M8x16 ............................................................................................................................................................................................................... 28 Nm
Remove vibration damper.
Assemble engine.
