Cooper (R56) L4-1.6L (N12) (2008)
/l4-1.6l_(n12)/Page-491005.png)
Remove return spring (2).
Set all return springs down on special tool 11 4 480 in a tidy and orderly fashion.
Release bolt (2).
Release centering bolt (1).
Remove locating plate and set down on special tool 11 4 480 in a tidy and orderly fashion.
Note:
Screw (1)
Setscrew (2).
Installation:
Observe screwing sequence
Remove roller cam follower (3) towards top and set down on special tool 114 480 in a tidy and orderly fashion.
Installation:
Uniform distribution must not be changed.
