Cooper (R56) L4-1.6L (N12) (2008)
/l4-1.6l_(n12)/Page-538001.png)
Front Crankshaft Seal: Service and Repair
11 14 151 Replacing Crankshaft Radial Seal
11 14 151 Replacing crankshaft radial seal (N12)
Special tools required:
^
11 9 611
^
11 9 612
^
11 9 613
Necessary preliminary tasks:
^
Remove transmission.
^
Remove flywheel.
Brake off PTFE ring (2) with a drift (1).
Important:
Risk of damage to crankcase and to crankshaft!
Secure special tool 11 9 611 with supplied screws (1) to crankshaft.
Position PTFE ring (1) with supporting ring (2) on special tool 11 9 611.
Push PTFE ring (1) in direction of arrow over supporting ring (2) onto crankshaft.
