Cooper (R56) L4-1.6L (N12) (2008)
Important:
If one or more needle bearings are faulty, the complete eccentric shaft must be replaced.
Magnet wheel (2) is highly magnetic. No metal chips must stick to the magnet wheel (2), replace if necessary.
Check all needle bearings (3) of eccentric shaft (1) for ease of movement.
Bearing cap number 10 is provided with a stop.
Lubricate all bearing caps with engine oil.
All bearing caps (1) are identified with numbers from (6 to 10).
Tightening torque: 11 12 6AZ.
Adjust eccentric shaft minimum lift.
Check eccentric shaft for ease of movement.
Assemble engine.