Cooper (R56) L4-1.6L (N12) (2008)
Backup Lamp Switch: Service and Repair
Replacing Reversing Light Switch
23 14 510 Replacing reversing light switch
Necessary preliminary tasks:
^
Remove resonance body and intake duct (N 12 only)
^
Remove intake neck for intake filter housing (N 14 only)
^
Remove intake duct (W16 only)
Disconnect plug connection (1) on reverse gear switch.
Remove reverse gear switch.
Tighten reversing light switch
M12 ................................................................................................................................................................................................................... 17 Nm
Note:
Illustration similar