Cooper (R56) L4-1.6L (N12) (2008)
Turn Signal Indicator: Service and Repair
63 13 200 Removing And Installing/Replacing Front Left or Right Auxiliary Direction Indicator
Necessary preliminary tasks:
-
Unlock engine hood/bonnet
Slide trim with auxiliary direction indicator (1) forwards and remove in direction of arrow from side panel.
Installation:
Make sure trim with auxiliary direction indicator (1) is correctly engaged on side panel.
Disconnect plug connection (1).
Unclip auxiliary direction indicator from trim (2) and remove.
Installation:
Make sure auxiliary direction indicator is correctly engaged on trim (2).
Replacement:
If necessary, remove bulb.