Cooper (R56) L4-1.6L (N12) (2008)
/l4-1.6l_(n12)/Page-306002.png)
^
If necessary, attach spoiler adapter.
^
If necessary, switch on chassis alignment system
^
Enter customer and vehicle data
^
Identify chassis version and select vehicle
^
Enter tire pressure and tread depth
^
Move vehicle into design position
^
Install brake tensioner.
^
Perform input measurement in accordance with equipment manufacturer's instructions.
^
Compare specified values with actual values.
Only in event of customer complaint (e.g. poor driving performance):
Important!
Do not remove screws/bolts (front axle carrier to engine carrier/ body).
Slacken all screws/bolts (front axle carrier to engine carrier body) and then retighten to specified torque.
Refer to Lowering front axle carrier.
^
If necessary, adjust front axle and rear axle
^
Perform output measurement in accordance with equipment manufacturer's instructions.
^
Save and print out test record.
^
Version with Dynamic Stability Control (DSC): Carry out steering angle sensor adjustment
^
Insert locking pins into both rotary and sliding plates
^
Remove chassis/wheel alignment system
