Cooper (R56) L4-1.6L (N12) (2008)
Oil Filter: Service and Repair
00 00 610 Engine Oil Service Incl. Supplementary Service
00 00 610 Engine Oil Service Incl. Supplementary Service (N12)
IMPORTANT: It is essential to adhere to the exact filling capacities specified.
Overfilling the engine with engine oil will result in engine damage.
Checking and drip-off times must be observed.
Recycling:
Catch and dispose of used oil in a suitable container.
Observe country-specific waste-disposal regulations.
Release oil filter cap (1) at hexagon head.
NOTE: Slowly open oil filter cap.
If necessary, catch escaping engine oil in a cloth.
Remove and insert oil filter element (1) in direction of arrow. Replace O-ring (2).
Installation:
Lubricate O-ring (2) with engine oil.
Tightening torque
1AZ Oil filter cap to oil filter housing
S90x4 ................................................................................................................................................................................................................ 25 Nm
Type: N14
NOTE: Replace sealing ring