Cooper (R56) L4-1.6L (N12) (2008)
/l4-1.6l_(n12)/Page-1324002.png)
To cut off, strip insulation and cut optical fibres to length, use pliers 61 4 321 (1) in conjunction with crimping head 61 4 322 (2) from crimping set 61 4
320.
NOTE: Pliers (1) open automatically as far as they will go when handles are pressed together.
Cutting optical fibre
Open pliers (1).
Place optical fibre (2) in cutting device (3).
Close pliers (1) and remove optical fibre (2).
Stripping insulation from optical fibre
Open pliers (1).
Open lever (2) in direction of arrow.
