Cooper (R56) L4-1.6L (N12) (2008)
Engine Control Module: Service and Repair
12 14 550 Replacing Control Unit (DME)
Necessary preliminary tasks:
-
Switch off ignition
-
Disconnect battery
IMPORTANT:
Follow instructions for removing and installing electronic control units.
Read and comply with notes on protection against electrostatic damage (ESD protection).
NOTE:
-
Connect diagnosis system
-
Read fault memory.
-
Check stored fault messages
-
Rectify faults
-
Clear fault memory
Unlock and remove cover (1).
Unlock plug (1) and remove.