Cooper (R56) L4-1.6L (N12) (2008)
Impact Sensor: Service and Repair
65 77 720 Replacing Left/Right B-Pillar Sensor
65 77 720 Removing And Installing/Replacing Left/Right B-Pillar Sensor
WARNING: Comply with airbag safety regulations.
Incorrect handling can activate airbag and cause injury.
Necessary preliminary tasks:
-
Disconnect battery negative lead
-
Remove rear side trim panel
Release bolt (1).
Remove sensor (2) towards bottom and disconnect associated plug connection.
Tightening torque
3AZ Sensor, B-pillar to door panel ............................................................................................................................................................................. 8 Nm
Type: R55, R56
Installation:
Retaining lug (3) must not be damaged.
Make sure sensor (2) is securely seated.