Cooper (R56) L4-1.6L (N12) (2008)
/l4-1.6l_(n12)/Page-125001.png)
Parking Assist Distance Sensor: Service and Repair
Replacing Signal Sensor
66 20 560 Removing And Installing / Replacing Signal Sensor
Necessary preliminary tasks:
-
Remove right rear light
Release screws (1) and place bracket with Park Distance Control control unit to one side.
Disconnect plug connection (1).
Release nut (2) and remove signal sensor (3).
Installation:
When installing, make sure that fitting lug of signal sensor (3) is situated in mounting.
