Replacing Speed Sensor - A/T (AISIN)
/l4-1.6l_(n12)/Page-284001.png)
Transmission Speed Sensor: Service and Repair
Replacing Speed Sensor (Output) (AISIN)
24 35 560 Replacing speed sensor (output) (AISIN)
Important!
After completion of work, check transmission fluid level.
Make a note of drained ATF quantity.
Required replenishment quantity approx. 4.5 liters.
Important!
Use only the approved automatic transmission fluid in this automatic transmission.
Otherwise the automatic transmission may incur extensive damage!
Do not drain fluid before the transmission has cooled down.
Necessary preliminary tasks:
^
Remove hydraulic selector unit
Release screw (1).
Tighten AISIN output speed sensor
M6 Screw ............................................................................................................................................................................................................ 6 Nm
Remove sensor (2).
