Cooper (R56) L4-1.6L (N12) (2008)
/l4-1.6l_(n12)/Page-1278004.png)
Release screw (1), fold door wiring harness plug on A-pillar (2) downwards slightly and remove.
Disconnect plug connection behind.
Pull rubber grommet (3) out of front door.
Feed out door wiring harness towards front to A-pillar.
61 13 Retaining Bracket
61 13 Retaining Bracket
Pull relevant fuse out of fuse block (1).
NOTE: Mark positions when removing fuses.
Pull locking slide (2) out of fuse block (1) as far as it will go.
With special tool 61 1 136 or 61 1 137 (ejector), press back arrester hook (3) of appropriate contact and pull out cable.
