Cooper (R56) L4-1.6L (N12) (2008)
/l4-1.6l_(n12)/Page-1236001.png)
Starter Solenoid: Service and Repair
12 41 041 Replacing Solenoid Switch
Turn off ignition.
Remove starter motor.
Release nut (1).
Remove cable lug (2).
CAUTION: Do not turn cable lug (2) while tightening down - risk of short circuit to starter motor housing.
Tightening torque, 12 41 4AZ.
Release screws (1).
Remove solenoid switch (1) and spring (2). Unhook pin (3).
Installation:
Check pin (3) for wear and apply grease.
