Cooper (R56) L4-1.6L (N12) (2008)
Trailing Arm: Service and Repair
Replacing Left or Right Trailing Arm Bracket
33 32 ... Replacing Left or Right Trailing Arm Bracket
Necessary preliminary tasks:
^
Remove trailing arm with bracket
Important!
When replacing trailing arm:
Replace self-tapping screw.
Before installing the trailing arm, tap a thread in the trailing
arm with the new screw.
Release screw (1) and remove bracket (2).
Installation:
Tighten down screw in normal position.
Holder, trailing arm to trailing arm
R55, R56
M14 (tighten in normal position) .............................................................................................................................................................. 165 Nm
After installation:
^
Perform chassis alignment check See: Alignment/Service and Repair