Cooper (R56) L4-1.6L (N12) (2008)
/l4-1.6l_(n12)/Page-1413009.png)
Before fitting:
Important!
Apply antiseize compound to inside of upper bead (1) and to outside of upper and lower sidewall (2) up to upper decorative line.
Apply antiseize compound over entire well area.
Lever sensor spare.
Fitting - lower bead:
Grip wheel and lay on tire.
Important!
Apply a light coating of anti seize compound to fitting head.
Position fitting head (1) as pictured.
Important!
Make sure tire is correctly positioned on fitting head.
Position bead in relation to fitting head (1) in accordance with equipment manufacturer's instructions.
Position sensor (RDC) (3) and valve min. 10-15 cm before traction point/catching point (2).
Sensor must not be subjected to load.
