Cooper (R56) L4-1.6L (N12) (2008)
/l4-1.6l_(n12)/Page-1416003.png)
1. Basic flange
2. Wheel centering element
3. Type flange
4. Clamping nut
Important!
To avoid retooling errors, it will be necessary to fit the wheel on the balancing machine in the same way (e.g. valve facing down) as it is
then fitted on the car.
Balance wheel in accordance with operating instructions of relevant balancing machine.
On light-alloy rims with distinctive J-shape rim flange, proceed as follows:
1. Gently force off tire side wall with special tool 36 1 020 at appropriate point from rim flange.
2. Install retaining clip (1).
3. Remove special tool 36 1 020.
Raise retaining clip with special tool 36 1 010. Slide balance weight underneath and allow it to snap into place.
Arrangement of balance weights for light-alloy rims with distinctive J-shape rim flanges.
1. Spring retainer
2. Balance weight
Adhesive weights must be used on all other light-alloy rims.
