Cooper (R56) L4-1.6L (N12) (2008)
/l4-1.6l_(n12)/Page-1039002.png)
Remove retaining screws (1) of gear shift housing.
Tighten shift housing to body .................................................................................................................................................................................... 8 Nm
Note:
Illustration similar.
Press shift bracket (1) in direction of arrow.
Fold shift bracket downwards.
Disconnect plug connection (1) and remove shift bracket.
Important!
An incorrectly adjusted gearshift mechanism can result in gear teeth noises being transmitted to the passenger compartment.
Installation:
Adjust selector lever.
Installation:
Move selector lever to "P" position.
Check whether parking lock is engaged by turning output shaft.
