Cooper (R56) L4-1.6L (N12) (2008)
/l4-1.6l_(n12)/Page-1060001.png)
Clutch Fluid: Service and Repair
21 00 006 Bleeding clutch hydraulic system
Necessary preliminary tasks:
^
Connect bleeder unit to brake fluid expansion tank.
Important!
Check relevant Operating Instructions for each device.
Charging pressure should not exceed 2 bar.
Remove dust cap from bleed valve.
Connect bleeder hose to bleed valve (1).
Open bleed valve (1) and flush until clear brake fluid emerges without air bubbles.
Close bleed valve.
Switch off bleeder unit or remove from expansion tank.
Correct brake fluid level in expansion tank.
