Cooper (R56) L4-1.6L (N12) (2008)
/l4-1.6l_(n12)/Page-1063001.png)
Clutch Slave Cylinder: Service and Repair
Removing and Installing or Replacing Clutch Master Cylinder
21 52 500 Removing and installing or replacing clutch master cylinder
Necessary preliminary tasks:
^
Remove bearing block for foot pedal
Press pin (1) together and press out.
Release nuts (2) and remove clutch master cylinder.
Tighten clutch master cylinder to pedals
M6 ....................................................................................................................................................................................................................... 9 Nm
Important!
After completing tasks
Bleed clutch hydraulic system.
