Cooper (R56) L4-1.6L (N12) (2008)
1.
Cut the washer fluid supply hoses (1) approximately 20mm from one of the front washer jets (Dimension A).
2.
Install a non-return valve (2) behind the washer jet (3), with the arrow pointing toward the washer jet.
3.
Repeat this procedure for the opposite front washer jet.
PARTS INFORMATION
WARRANTY INFORMATION
Covered under the terms of the MINI New Vehicle Limited Warranty.
Please refer to the latest KSD for all applicable labor operations and allowances.
If the appropriate labor operation is not contained in KSD, then a work time labor operation should be used.