Cooper Convertible (R52) L4-1.6L (W10) (2005)
Important!
Guide wheel (3) must not be pulled out of mounting plate (4).
Power window unit must be replaced in this event!
Slacken screws (1) max. 5 mm (do not release fully!).
Slide in special tool 00 9 318 See: Tools and Equipment/00 9 318 Multipurpose Wedge between flat motor (2) and mounting plate (4).
Press special tool 00 9 318 See: Tools and Equipment/00 9 318 Multipurpose Wedge against deflection wheel (1) into mounting plate (3).
Unfasten screws.
Carefully lift flat motor (2) off mounting plate (3).